Product Details:Width (mm)
UPTO 2200MM
Length (m)
UPTO 250 METER
Thickness (mm)
UPTO 25MM
Type
General Purpose Belts, Plastic Belting and Chain, Hinge Metal Belting, Woven Wire Belting, Flat Wire Belting, CHEVRON BELT

Never ending demands of customers for Rubber Conveyor Belt.Our product range is skim coated to give LONG LIFE.

High temperatures, low prices?
‘Low-price’ heat-resistant conveyor belts are priced as such because the materials and processes used to make them are the lowest-cost (and therefore, lowest-quality) options. Some 80 per cent of the cost of making a conveyor belt is the materials. A well-made, good-quality heat-resistant belt will easily outperform and outlast ‘economy’ versions several times over. The initial price per metre may be higher, but the eventual cost will ultimately be many times lower.

Conveyor belts with a smooth carrying surface are useful for conveying of packed and unpacked material up to the angle of inclination 22° as an upper limit.
CHEVRON belts are the right belts to meet your requirements when higher angles of inclination are required.

Areas of application:

quarries, sandpits
cement works, lime works
farming: conveying of beets, grains, potatoes, fertilizers, wooden chips
coal and coke transport
sugar refineries
salt mines
mobile crushers and screens
It’s all about the rubber!

The rubber covers on the top and bottom of the belt act as the barrier between the heat source and the carcass. The carcass consists of layers of fabric (usually polyester and nylon), bonded together by thin layers of rubber. The effectiveness of the heat-resistant rubber covers is the most crucial factor that determines the length of the belt’s working life. If the core temperature of the carcass becomes too high then the belt will start to fall apart. This ‘delamination’ process also occurs between the covers and the carcass. An increase of only 10??C in the core temperature of the belt carcass can reduce the life of the belt by as much as 50 per cent. The only way to prevent this is to use high-quality, specifically-developed rubber containing a mix of polymers and chemicals that can withstand the heat.

ISO 4195 heat resistance testing

To provide the most accurate measurement of heat resistance (and therefore, anticipated working life) accelerated aging tests are conducted by placing rubber samples in high-temperature ovens for a period of seven days. The reduction in mechanical properties is then measured. The three classes of aging within ISO 4195 are:

• Class 1 (100??C)

• Class 2 (125??C)

• Class 3 (150??C). To include more extreme temperature resistance qualities,

The weakest link

The splice joint is always the weakest point in any belt and this is especially so when it comes to heat-resistant belts. The heat build-up in the splice joint area will cause the joint to come apart (delaminate). The golden rule applicable to all splice joints is that the splice materials used to make the joint should be identical to the rubber used in the belt cover. It is essential that the heat resistance properties of the splice materials are as good as the actual belt covers.

NOTE :

As we are manufacturer of rubber conveyor belts Upto 2200m wide in all material like , Neoprene , SBR , NBR , EPDM , Silicone and of Grade Like , M-24 For Abrasive Application , HR & SHR – T1 to UHR-500 Degree For Heave Heat Resistant , FR Grade – For Fire Resistant.

GRADE : M-24 , SHR-T2 , SHR-T3 , UHR-300 , FR , OR
PLY TYPE : EP , NN , CC , OZ
TENSILE : 315/3 , 400/4 , 640/4 , 800/4 , 1000/5 , 960/6 

We develop quality as per CLIENTS needs with reasonable rates.

Additional Information:
Item Code: 40103992
Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
Port of Dispatch: KOLKATA , MUMBAI , GUJRAT
Production Capacity: 1000 MTR PER DAY
Delivery Time: 1 DAYS
Packaging Details: ACCORDING TO CLIENT OR AS PER MATERIAL SIZE/WEIGHT